Close Print Download Datasheet (PDF format)

Not Available!
No image for instrument: SMALL SCALE CLOSED CUP FLASH POINT TESTER !

Product Code:

Product Name:

780
SMALL SCALE CLOSED CUP FLASH POINT TESTER

Standards:

ASTM D3278 IP 534 FLASH POINT OF LIQUIDS BY SMALL SCALE CLOSED-CUP APPARATUS
These test methods cover procedures for determining whether a material does or does not flash at a specified temperature or for determining the lowest finite temperature at which a material does flash when using a small scale closedcup apparatus. The test methods are applicable to paints, enamels, lacquers, varnishes, and related products having a flash point between 0 and 110￿C (32 and 230°F) and viscosity lower than 150 cSt at 25°C (77°F).

ASTM 3828 FLASH POINT BY SMALL SCALE CLOSED CUP TESTER
These test methods cover procedures for flash point tests, within the range of 30 to 300C, of petroleum products and biodiesel liquid fuels, using a small scale closed cup tester. The procedures may be used to determine, whether a product will or will not flash at a specified temperature (flash/no flash Method A) or the flash point of a sample (Method B). When used in conjunction with an electronic thermal flash detector, these test methods are also suitable for flash point tests on biodiesels such as fatty acid methyl esters (FAME).

ASTM D7236 FLASH POINT BY SMALL SCALE CLOSED CUP TESTER (RAMP METHOD)
This test method covers the determination of the flash point of aviation turbine fuel, diesel fuel, kerosine and related products in the temperature range of 40 to 135°C by a small scale closed cup apparatus.

IP 303(obs)
Unavailable

IP 523 ISO 3679 DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD
This International Standard specifies a method for the determination of the closed cup flash point of paints (including water-borne paints), varnishes, paint binders, adhesives, solvents, petroleum, and related products having closed cup flash points within the range of -30 °C to 300 °C

IP 524 ISO 3680 DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD
This International Standard specifies a method for the determination of the ability of paints (including waterborne paints), varnishes, paint binders, adhesives, solvents and petroleum and related products, when maintained at a selected test temperature within the range of -30 °C to 300 °C, and under the conditions of test, to yield sufficient flammable vapour at this temperature to cause ignition on the application of a test flame in a standard manner.

ASTM E502 SELECTION AND USE OF ASTM STANDARDS FOR THE DETERMINATION OF FLASH POINT OF CHEMICALS BY CLOSED CUP METHODS
This test method covers the determination of the ?ash point of liquid and solid chemical compounds ?ashing from below ? 10 to 370C (16 to 700F). The procedures and apparatus in Test Methods D 56, D 93, D 3278, D 3828, and D 3941 are to be used. Modi?cation to these procedures are speci?ed for tests on solids and viscous liquids. The signi?cance of the results obtained is discussed along with possible sources of error and factors that might cause interference.

Origin country: Italy

Instrument Description:

Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Aluminum block for 2 and 4 ml samples, cover with manual opening system, gas ignition with pilot flame, on/off pilot lamp. Thermal insulating with cooling coil for circulation of cooling fluid with optional cryostat

Technical Specifications:

- Temperature: from -10 (14°F) to 300°C (572°F)
- Power supply: 220V 50Hz
- Power: 600W

Accessories

Photo
Code
Name
Description
No Image!
No image for instrument: GAS CYLINDER 2KG!
10-0748 GAS CYLINDER 2KG Empty
No Image!
No image for instrument: GAS REDUCER!
10-0749 GAS REDUCER 30MBAR
No Image!
No image for instrument: Gas tube!
10-0747 Gas tube L= 5 m
No Image!
No image for instrument: Thermometer IP 91C!
T-IP91C Thermometer IP 91C range 0 to +110°C, div. 1T°, imm. 44mm, length 198mm
No Image!
No image for instrument: Thermometer IP 98C!
T-IP98C Thermometer IP 98C range +100 to +300°C, div. 2T°, imm. 44mm, length 197mm

Spare parts

Photo Code Name Description

Consumables x2 years

Photo Code Name Description

Instrument News and Updates:


No further news and updates added for this instrument at the moment.