Online Catalogue
Current Version: 2.0
- Viscosity
- Cloud & Pour Point
- Densimetry
- Penetration
- Inflammability
- Distillation
- Residues Trace & Contaminants
- Sampling & Gauging Tanks
- Corrosion and Oxidation
- Rust
- LPG & Pressure
- Foaming
- Greases
- Colour and Wax
- Bitumen
- Various Instruments
|
This instrument it's used to determinate the viscosity of an oil as a time of flow in seconds; it doesn't measure the viscosity in absolute units. Equipped with stirrer, cooling coil, digital thermoregulator PID with overtemperature alarm and PT100A probe. Calibrated brass oil cup with orifice no.1 for article 120 and no.2 for article 122. Fitted with closing-ball-ended rod, 18/8 stainless steel water bath, lid with stainless steel heater, insulated double wall, front opened jacket. The instrument is disponible with: 1, 2 and 3 places. |
|
|
This instrument it's used to determinate the viscosity of an oil as a time of flow in seconds; it doesn't measure the viscosity in absolute units. Equipped with stirrer, cooling coil, digital thermoregulator PID with overtemperature alarm and PT100A probe. Calibrated brass oil cup with orifice no.2. Fitted with closing-ball-ended rod, 18/8 stainless steel water bath, lid with stainless stel heater, insulated double wall, front opened jacket. |
|
|
Equipped with stirrer, cooling coil, digital thermoregulator PID with overtemperature alarm and PT100A probe. Calibrated brass cup with 10mm dia. orifice, fitted with closing-ball-ended rod and level indicator, 18/8 stainless steel water bath, lid with stainless steel heater, front opened jacket. This instrument is also disponible in four variants: with 1, 2, 3 or 4 places |
|
|
Calibrated brass oil cup with stainless steel flowing orifice, polished and calibrated 1.76mm dia Universal and 3.15mm dia Furol. Digital thermoregulator PID with overtemperature alarm and PT 100A probe, stirrer, cooling coil, 18/8 stainless steel water bath, insulated double wall and front opened jacket. This instrument is also disponible in 4 variants: with 1, 2, 3 or 4 places. |
|
|
Made in brass, no.1, 1.98 mm., 20 - 85 cP |
|
|
200 - 80.000.000 cP |
|
|
Brass test cup with stainless steel level-control of capillary flow outcropping, lid with Teflon tipped rod for closing the capillary hole, hand stirrer, bath with stainless steel heater regulated by table electronic regulator. |
|
|
Calibrated brass cup for oils, with stainless steel orifice, Teflon tipped closing rod. 18/8 stainless steel water bath, lid with stirrer motor, cooling coil, stainless steel heater, digital thermoregulator with overtemperature alarm and PT 100A probe. Insulated double wall and front opened jacket. The instrument is available in two models: with one or two places. |
|
|
Suitable for viscosity 0.6 a 250.000 mPa*s. Mounted on support with levelling screws and bubble level, fitted with stop pin which allows the viscometer to reverse. Delivery tube gauged with two maximum levelnotches and an intermediate-level one, equipped with 6 gauged balls of variable diameter. Pyrex glass jacket for thermostatic bath with covers, neoprene gaskets, connections for the circulation of the thermostated liquid from the thermostatic bath. With certificate at 20°C. |
|
|
Used for measuring oils viscosity by Cannon-Fenske, Ubbelohde and similar capillary. Working temperature from ambient to 150°C ±0.1°. Borosilicate tank, cover with 5 holes 50.8mm, stainless steel control box on the cover. Digital thermoregulator PID with overtemperature alarm and PT100A probe, cooling coil for improved control near to ambient temperature, stainless steel heater, motor stirrer, with stand-by stainless steel covers, protection Lexan jacket. |
|
|
Structure made in stainless steel, cover with 5 holes 50.8mm, temperature control by digital thermoregulator PID stability ±0.01°C (120°C) and display resolution 0.01°, bright TFT display shows all the process relevant data. User friendly interface: the functions self-explanitory and are listed in alphabetical order in each of the selected languages. Easy-control: the zoom function allowa the values to be read from a distance. Set point limits, optical and acoustical alarm, mains failure automatic function, graphic function, programmer with 3 programs each with 5 steps, temperature control mode(internal process), TAC (Tru adaptive control), self-optimising internal and cascade control, ramp function. Cooling coil, stand-by stainless steel covers. |
|
|
Air bath with 3 places (3 for test cell and 3 insulated cell carrier), floor model, equipped with turntablerotating at 4rpm, digital thermoregulator PID with sovratemperature alarm PT100A probe. Range of temperature from ambient to -40°C ±0.3° |
|
|
Solvent cleaning-unit for washing and drying capillary-glass-tube viscometers. Washes and dries up to 6 capillary tubes at a time. Stainless steel case with 6 independent regulation valves fitted with holding-down spring, air filters, pressure regulator and pressure gauge, to be feed from one external air source. 7.5 litres capacity internal solvent tank with level indicator, Protection cover in stailess steel and window check. |
|
|
This instrument is composed by a anodized aluminium cup wioth stainless steel orifice with a diameter prescribed by ASTM D1200, D5125, DIN53211, ISO2431 for each instrument type |
|
|
100ml flask, "15" tapered joint condenser, "12" taper for thermometer. |
|
|
Consisting of: 1 cooling bath cup (1 liter dewar with stainless steel stand), 1 cover for jacket tube with opening for dry ice, 1 jacket tube 25x150mm, 1 test tube 15x125mm, 1 stopper for test tube, 1 stopper for thermometer, stirrer ring shaped stainless steel wire dia.2mm |
|
|
Consisting of double tube 20x230mm fitted with cap, brass wire stirrer and brass stopping box, Dewar jar 75x280mm mount-based. |
|
|
Consisting of double tube 20x230mm fitted with cap, geared motor for stirring with brass wire stirrer and brass stopping box, electronic regulator for stirrer speed, Dewar jar 75x280mm mount-based. |
|
|
Consisting of double tube Ë20x230mm fitted with cap, mounted Dewar jar Ë95x195mm, geared motor for stirring at 80rpm with stainless steel wire stirrer, digital thermometer. This item is mounted on a plate structure painted with anti-acid epoxidic products. |
|
|
Consisting of double tube 20x230mm fi tted with cap, geared motor for stirring at 80rpm with wire stirrer. This item is mounted on a tripod for place on refrigerator bench. |
|
|
31x125mm test tube with a set of neoprene gasket, 3-hole Teflon cap, 46mm dia. jacket, 20ml Pyrex pipette, wire filter equipped with filtering disc 325 M, U-shaped glass pressure gauge, 3-way cock, junction glass tubes, cap, bottle. |
|
|
Resistant structure painted with anti-acid epoxidic products, fitted with four wheels allowing movement. PVC cover with four wells in aluminium block for accomodate four graduated jars, equipped with a hole thermometer is placed. Four small stand-by covers are enclosed. Temperature is controlled by digital thermoregulator fitted with a probe PT100 A. Automatic defrosting device, heating element controlled by a indipendent switch for a quick return to a ambient temperature, earth leakage circuit breaker. CFC free refrigerant gases are used. |
|
|
Resistant structure painted with anti-acid epoxidic products, fitted with four wheels allowing movement. PVC cover with 16 wells (4 for each temperature) for accomodate 16 graduated jars, equipped with 4 holes where the thermometers are placed. 16 small stand-by covers are enclosed. Working temperatures: 0, -18, -33, -51â°C. Temperature is controlled by 4 digital thermoregulator (one for each temperature) fitted with a probe PT100 A. Automatic defrosting device low voltage, earth leakage circuit breaker. CFC free refrigerant gases are used. To dry with wells in aluminium block. |
|
|
Light and resistant structure made in die-casted aluminium covered by special plastic material, fitted with four wheels allowing movement. PVC cover with 4 wells (1 for each temperature) for accomodate 4 graduated jars, equipped with 4 holes where the thermometers are placed. 4 small stand-by covers are enclosed. Working temperatures: 0, -18, -33, -51°C. Temperature is controlled by 4 digital thermoregulator (one for each temperature) fitted with a probe PT100 A. Automatic defrosting device low voltage, earth leakage circuit breaker. CFC free refrigerant gases are used. To dry with wells in aluminium block. |
|
|
Light and resistant structure made in die-casted aluminium covered by special plastic material, fitted with four wheels allowing movement. PVC cover with 12 wells (4 for each temperature) for accomodate 12 graduated jars, equipped with 3 holes where the thermometers are placed. 12 small stand-by covers are enclosed. Working temperatures: 0, -18, -33°C. Temperature is controlled by 3 digital thermoregulator (one for each temperature) fitted with a probe PT100 A. Automatic defrosting device low voltage, earth leakage circuit breaker. CFC free refrigerant gases are used. To dry with wells in aluminium block. |
|
|
Light and resistant structure made in die-casted aluminium covered by special plastic material, fitted with four wheels allowing movement. PVC cover with 3 wells (1 for each temperature) for accomodate 3 graduated jars, equipped with 3 holes where the thermometers are placed. 3 small stand-by covers are enclosed. Working temperatures: 0, -18, -33°C. Temperature is controlled by 3 digital thermoregulator (one for each temperature) fitted with a probe PT100 A. Automatic defrosting device low voltage, earth leakage circuit breaker. CFC free refrigerant gases are used. To dry with wells in aluminium block. |
|
|
Resistant structure painted with anti-acid epoxidic products, fitted with four wheels allowing movement. PVC cover with 20 wells (4 for each temperature) for accomodate 20 graduated jars, equipped with 4 holes where the thermometers are placed. 16 small stand-by covers are enclosed. Working temperatures: 0, -18, -33, -51 -69â°C. Temperature is controlled by 5 digital thermoregulator (one for each temperature) fitted with a probe PT100 A. Automatic defrosting device low voltage, earth leakage circuit breaker. CFC free refrigerant gases are used. To dry with wells in aluminium bock |
|
|
Resistant structure painted with anti-acid epoxidic products, fitted with four wheels allowing movement. PVC cover with 20 wells (5 for each temperature) for accomodate 20 graduated jars, equipped with 4 holes where the thermometers are placed. 16 small stand-by covers are enclosed. Working temperatures: 0, -18, -33, -51 -69°C. Temperature is controlled by 5 digital thermoregulator (one for each temperature) fitted with a probe PT100 A. Automatic defrosting device low voltage, earth leakage circuit breaker. CFC free refrigerant gases are used. To dry with wells in aluminium bock |
|
|
Resistant structure painted with anti-acid epoxidic products, fitted with four wheels allowing movement. PVC cover with 20 wells (4 for each temperature) for accomodate 20 graduated jars, equipped with 4 holes where the thermometers are placed. 16 small stand-by covers are enclosed. Working temperatures: 0, -18, -33, -51 -69°C. Temperature is controlled by 5 digital thermoregulator (one for each temperature) fitted with a probe PT100 A. Automatic defrosting device low voltage, earth leakage circuit breaker. CFC free refrigerant gases are used. To dry with wells in aluminium bock |
|
|
Conventional CO2 model. Dewar jar with internal brass support and stainless steel base, optical glass test tube according to the method, thermometer cap, centering gasket, brass tube fi tted with bottom disc. |
|
DIGITAL DENSIMETRY BATH SERIES ASTM D287 D1298 |
Pyrex tank, cover with: 5 X Ã51mm. holes for: ART.550/300 and 550/450; 4 X Ã61mm. holes for: ART.550/300/BI and 550/300/BI, test tubes with a diameter of: 50x260mm for ART.550/300 and 550/300/BI and 60x440mm for ART.550/450 and 550/450/BI and supporting a stainless steel control box. The Pyrex glass tank have a capacity of: 29liters for ART.550/450 and 550/450/BI and 19liters for ART.550/300 and 550/300/BI Digital thermoregulator ±0.1ð with sovratemperature alarm, motor stirrer, stainless steel heater and cooling coil for working ambient temperature. This item is provided with test tubes blocking-system and stand-by stainless steel covers. |
|
MANUAL PRECISION PENETROMETER ASTM D 5 D 217D 937 |
PVC base with inset spirit level and adjustable feet, solid stainless steel column supporting a calibrated dial with 360 divisions corresponding to 1/10 of millimeter and release button with manual halting function. Micrometric regulation, supplied with 47.5g plunger in stainless steel and check light. |
|
SEMIAUTOMATIC PRECISION PENETROMETER ASTM D5 D217 |
PVC base with inset spirit level and adjustable feet, mounted on a plate painted with epoxidic products that works as a control box with precision digital timer. Solid stainless steel column supporting a calibrated dial with 360 divisions corresponding to 1/10 of millimeter and release button controlled by a low voltage solenoid, controlled on its turn by a timer. Supplied with 47.5 plunger in stainless steel, micrometric regulation of movements with a check light. |
|
MANUAL GREASE WORKER ASTM FTM |
Brass body, screw cover with air valve and thermometer pass, piston with ground-slideway brass handle, base with lever. |
|
AUTOMATIC GREASE WORKER (1 PLACE) ASTM FTM |
For manipulating fats automatically. Brass body, screw cover with air valve and thermometer pass, piston with ground-slideway brass handle. with 6 digit stroke counter and automatic preselector. |
|
AUTOMATIC GREASE WORKER (2PLACES) ASTM FTM |
For manipulating fats automatically. No.2 brass body, screw cover with air valve and thermometer pass, piston with ground-slideway brass handle. with 6 digit stroke counter and automatic preselector. |
|
Half-Scale Grease Worker ASTM D1403 |
Used to work the grease specimen and prepair it for the penetration test acording to ASTM D1403. The stroker is a stainless steel stroker with a 8x6.35mm. ASTM churn plate. |
|
Quarter-Scale Grease Worker ASTM D1403 |
Used to work the grease specimen and prepair it for the penetration test acording to ASTM D1403. The stroker is a stainless steel stroker with a 8x3.17mm. ASTM churn plate. |
|
GAS PENSKY-MARTENS D93 D3934 D3941 E134 IP 34 IP 3 |
Gas heated with Meker lamp, fitted with flame filter and safety valve. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual trip-opening. Stirring is manual, air bath made in brass with external stainless steel calotte. |
|
AUTOMATIC PENSKY-MARTENS ASTM D93 D3934 D3941 E13 |
Testing unit equipped with two ignition systems, electrical system or flame exposure device, measurement of the ignition is detected by an ionisation detector. When the sample reaches the selected test temperature, the shutter opens and the ignition system introduces itself automatically. If the the flash point is reached, the detection is done by an ionisation detector; if not, the shutteer closes again and the sample continues to warm up until the next test temperature. Supplied with software Windows® based, user friendly interface, all analytical parameters recoded, customisable analysis parameters and methods, customizable results report, printable graphs and results, self-identification of the typology of the analysers connected, audible alarm and displayed messages (at the end of the analysis and in case of errors and/or malfunctions). |
|
DIGITAL ELECTRIC PENSKY-MARTENS ASTM D93 D3934 D39 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A, air bath made in brass with external stainless steel calotte. Digital thermometer with thermocouple. |
|
DIGITAL ELECTRIC PENSKY-MARTENS ASTM D93 D3934 D39 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with electrical ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A, air bath made in brass with external stainless steel calotte. Digital thermometer with thermocouple. |
|
ELECTRIC PENSKY-MARTENS ASTM D93 D3934 D3941 E134 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A, air bath made in brass with external stainless steel calotte. |
|
ELECTRIC PENSKY-MARTENS ASTM D93 D3934 D3941 E134 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with electrical ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A, air bath made in brass with external stainless steel calotte. |
|
DIGITAL ELECTRIC PENSKY-MARTENS PROCEDURE A and B |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A and B, air bath made in cast iron with external stainless steel calotte. Digital thermometer with glass PT100A probe |
|
DIGITAL ELECTRIC PENSKY-MARTENS PROCEDURE |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with electrical ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A and B, air bath made in cast iron with external stainless steel calotte. Digital thermometer with thermocouple. |
|
DIGITAL ELECTRIC PENSKY-MARTENS 3 PLACES ASTM D93 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A, air bath made in brass with external stainless steel calotte. Digital thermometer with thermocouple. |
|
ELECTRIC PENSKY-MARTENS 3 PLACES ASTM D93 D3934 D3 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A, air bath made in brass with external stainless steel calotte. |
|
RAPID EQUILIBRIUM CLOSED CUP - RECC ASTM D3828 IP |
A specimen of a sample is introduced by means of a syringe into the cup of the selected apparatus that is set and maintained at the specific temperature/expected flash point. After a specified time a test flame is applied and the observation made whether or not a flash occurred. Measuring R.E.C.C. Devices: - Testing unit equipped with two ignition systems - Electrical system or flame exposure device - Flash point detected by a ionization system Measuring Temperature Probe: - Platinum resistance PT100 class A Measuring Parameters: - Temperatures: in ðC - Measuring range: -50ðC +350ðC - Resolution: 0.06 ðC - Accuracy: ñ 0.1 ðC - Repeatability / Reproducibility: as per standards methods or better Software Features: - The software is Windowsî based (Windowsî 2000, XP, Vista) - User friendly interface - All analytical parameters recoded - Customizable analysis parameters and methods - Customizable results report - Printable graphs and results - Self-identification of the typology of the analysers connected - Standard method as per ASTM / IP / ISO / EN / DINâ⬦ norms of reference - Unknow sample - Audible alarm and displayed messages at the end of the analysis and in case of errors and/or malfunctions - Direct access to all analog, digital, inputs and outputs - Selectable value displaying: ðC / Volt - Automatic calibration of each temperature probe - Last calibration date referred to each single probe displayed and relative data printable - Display of calibration diagram - Insertion of offset values - Standard and advanced calibration modes - FIelds for introduction of operator and product name - Archive viewer for files recall - All analysis stored in Excelî compatible format - Storage capacity for more than 60ââ¬â¢000 analysis - LIMS compatible |
|
SEMIAUTOMATIC PENSKY-MARTENS ASTM D93 D3934 D3941 |
Electrically heated by one digital thermo-regulator for a automated heating rate, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A, air bath made in brass with external stainless steel calotte. |
|
SEMIAUTOMATIC PENSKY-MARTENS ASTM D93 D3934 D3941 |
Electrically heated by one digital thermo-regulator for a automated heating rate, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with electronical ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A, air bath made in brass with external stainless steel calotte. |
|
SEMIAUTOMATIC PENSKY-MARTENS PROCEDURE A & B ASTM |
Electrically heated by two digital thermo-regulator for a automated heating rate (one for procedure A and one for procedure B), mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A & B, air bath made in brass with external stainless steel calotte. |
|
SEMIAUTOMATIC PENSKY-MARTENS PROCEDURE A & B ASTM |
Electrically heated by two digital thermo-regulator for a automated heating rate (one for procedure A and one for procedure B), mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with electronic ignition device allowing to ignite the testing sample by a manual trip-opening. Motor stirrer for Procedure A & B, air bath made in brass with external stainless steel calotte. |
|
ELECTRIC ABEL FLASH POINT IP 170 (obs) ISO 13736 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual glide-opening. Motor stirrer, air bath and water bath are made in chromium-plated copper. With internal cooling coil. |
|
AUTOMATIC ABEL FLASH POINT IP 170 IP 491 IP 492 I |
Testing unit equipped with two ignition systems, electrical system or flame exposure device, measurement of the ignition is detected by an ionisation detector. The sample is warmed up according to the methods. When the sample reaches the selected test temperature, the shutter is opened and the ignition system introduces itself automatically. If the flash point is reached, the detection is done by an ionisation detector. If not, the shutter closes again and the sample continues to warm up until the next test temperature. Supplied with software Windows® based, user friendly interface, all analytical parameters recoded, customisable analysis parameters and methods, customizable results report, printable graphs and results, self-identification of the typology of the analysers connected, audible alarm and displayed messages (at the end of the analysis and in case of errors and/or malfunctions). |
|
DIGITAL ELECTRIC ABEL FLASH POINT IP 170 (obs) ISO |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual glide-opening. Motor stirrer, air bath and water bath are made in chromium-plated copper. Digital thermometer with thermocouple. With internal cooling coil. |
|
GAS ABEL FLASH POINT IP 170 (obs) ISO 13736 |
LPG heated with microbunsen fitted with safety valve. Calibrated brass crucible, cover with gas ignition device allowing to ignite the testing sample by a manual glide-opening. Motor stirrer, air bath and water bath are made in chromium-plated copper. With internal cooling coil. |
|
ELECTRIC CLEVELAND ASTM D92 IP 36 DIN 51376 ISO 25 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass cup, gas ignition device fitted with a pivot manually passing through the cup. Fitted with pincers for thermometer. |
|
ELECTRIC CLEVELAND 4 PLACES ASTM D92 IP 36 DIN 513 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass cup, gas ignition device fitted with a pivot manually passing through the cup. Fitted with pincers for thermometer. |
|
AUTOMATIC CLEVELAND ASTM D92 IP 36 DIN 51376 ISO 2 |
Testing unit equipped with 2 electrical ignitors and a pilot flame, with automatic flame exposure device, measurement of the ignition is detected by an ionisation detector. When the sample reaches the selected test temperature, the flame is passed automatically above the sample.When the flash point is reached, the detection is done by an ionisation detector. For fire point detection, the sample continues to be heated until permanent flame is detected by the second PT100 probe, then the auto extinguisher will be placed on the top of the test cup. Supplied with software Windows® based, user friendly interface, all analytical parameters recoded, customisable analysis parameters and methods, customizable results report, printable graphs and results, self-identification of the typology of the analysers connected, audible alarm and displayed messages (at the end of the analysis and in case of errors and/or malfunctions). |
|
SEMIAUTOMATIC ELECTRIC CLEVELAND ASTM D92 IP 36 DI |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass cup, gas ignition device fitted with a pivot passing through the cup controlled by timer. Fitted with pincers for thermometer. |
|
SEMIAUTOMATIC ELECTRIC CLEVELAND 4 PLACES ASTM D92 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Calibrated brass cup, gas ignition device fitted with a pivot passing through the cup controlled by timer. Fitted with pincers for thermometer. |
|
GAS CLEVELAND ASTM D92 IP 36 DIN 51376 ISO 2592 |
Gas heated with microbunsen fitted with safety valve. Calibrated brass cup, gas ignition device fitted with a pivot manually passing through the cup. Fitted with pincers for thermometer. |
|
ELECTRIC TAG CLOSED ASTM D56 D3934 D3941 |
Gas heated with microbunsen fitted with safety valve. Test copper cup equipped with glidedevice and gas-ignition. Waterbath and support-jacket made in brass. With internal cooling coil. |
|
ELECTRIC TAG CLOSED ASTM D56 D3934 D3941 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Test copper cup equipped with glidedevice and gas-ignition. Waterbath and support-jacket made in brass. With internal cooling coil. |
|
AUTOMATIC TAG FLASH POINT ASTM D56 D3278 D3934 D39 |
Testing unit equipped with two ignition systems, electrical system or flame exposure device, measurement of the ignition is detected by an ionisation detector. When the sample reaches the selected test temperature, the shutter opens and the ignition system introduces itself automatically. If the the flash point is reached, the detection is done by an ionisation detector; if not, the shutteer closes again and the sample continues to warm up until the next test temperature. Supplied with software Windows® based, user friendly interface, all analytical parameters recoded, customisable analysis parameters and methods, customizable results report, printable graphs and results, self-identification of the typology of the analysers connected, audible alarm and displayed messages (at the end of the analysis and in case of errors and/or malfunctions). |
|
GAS TAG OPEN ASTM D1310 D3143 |
Gas heated with microbunsen fitted with safety valve. Test cup made in moulded glass, gas ignition device with pivot passing manually over the cup. This item has a water bath fi tted with pincers for thermometer |
|
ELECTRIC TAG OPEN ASTM D1310 D3143 |
Electrically heated by electronic regulator, mounted on a case painted with anti-acid epoxidic products. Test cup made in moulded glass, gas ignition device with pivot passing manually over the cup. This item has a water bath fi tted with pincers for thermometer |
|
DOUBLE DISTILLATION UNIT GROUP 0-3 |
This instrument to determine the quantitatively boiling point characteristics using atmospheric distillation of light and middle distillates, automotive spark-ignition engine fuels, aviation gasolines, aviation turbine fuels, diesel fuels, biodiesel blends, marine fuels, special petroleum spirits, naphthas, white spirits, kerosines and grades 1 and 2 burner fuels. 2 heatings completely made in stainless steel, this unit is fitted with a toughned glass window. Heating is controlled by a heating plate which is electronically regulated. The plate is supported by a base whose height is adjustable with an elevation mechanism, controlled by and external handle. Condensing completely made in stainless steel. Condensing tube made of chromium plated brass. Equipped with insulated cover, connections allowing water circulation, drain cock. Both right and left handed condensers are available. |
|
REFRIGERATED DISTILLATION UNIT GROUP 0-3 ASTM D86 |
One heating distillation unit completely made in stainless steel, this unit is fitted with a toughned glass window. Heating is controlled by a heating plate which is electronically regulated. The plate is supported by a base whose height is adjustable with an elevation mechanism, controlled by and external handle and a condensing distillation unit completely made in stainless steel, condensing tube made of chromium plated brass, equipped with insulated cover, connections allowing water circulation, drain cock, refigerated by compressor controlled by a digital thermoregulator. CFC free refrigerant gases are used. |
|
REFRIGERATED DISTILLATION UNIT GROUP 0 - 4 ASTM D8 |
One heating distillation unit completely made in stainless steel, this unit is fitted with a toughned glass window. Heating is controlled by a heating plate which is electronically regulated. The plate is supported by a base whose height is adjustable with an elevation mechanism, controlled by and external handle and a condensing distillation unit completely made in stainless steel, condensing tube made of chromium plated brass, equipped with insulated cover, connections allowing water circulation, drain cock, refigerated by compressor controlled by a digital thermoregulator. CFC free refrigerant gases are used. For distillation group 0 - 4. |
|
DOUBLE REFRIGERATED DISTILLATION UNIT ASTM D86 |
Two heating distillation unit (990/A) and a condensing distillation unit (990/B) one refrigerated by compressor controlled by a digital thermoregulator. CFC free refrigerant gases are used. |
|
DOUBLE REFRIGERATED DISTILLATION UNIT GROUP 0-4 AS |
Two heating distillation unit (990/A/4) and a condensing distillation unit (990/B) one refrigerated by compressor controlled by a digital thermoregulator. CFC free refrigerant gases are used. |
|
GAS DISTILLATION OF CUT-BACK ASPHALTIC APPARATUS A |
Gas heater, 500ml side arm distillation fl ask, Ã117mm chimney with insulated metal shield, insulated cover split in two halves, Ã100mm lamp screen, two sheets of 16 mesh gauze, 100ml cylinder lamp, empty tube glass cooler, nozzle extensor made in glass, 500ml ball. Supported on a height adjustable platform. |
|
ELECTRIC DISTILLATION OF CUT-BACK ASPHALTIC APPARA |
Electric heater, 500ml side arm distillation fl ask, 117mm chimney with insulated metal shield, insulated cover split in two halves, 100mm lamp screen, two sheets of 16 mesh gauze, 100ml cylinder lamp, empty tube glass cooler, nozzle extensor made in glass, 500ml ball. Supported on a height adjustable platform. |
|
DISTILLATION OF PRETROLEUM PRODUCTS AT REDUCED PRE |
Consisting of 500ml distillation flask with insulating mantle, vacuum jacketed distillation column with fused on 200ml calibrated condenser, a 200ml jacket receiver, vacuum connections and two cold trap. Electric heater with electronic regulator, digital indicator temperature with thermocouple for measurement vapor temperature, vacuum pump, pressure regulating system, vacuum gauge with mercury manometer. |
|
DISTILLAZIONE FRAZIONATA 60 P.T. |
Composed by 3 columns Ã5-12-25x900mm with shirt under vacuum for the fi rst two, automatic head with valve for reflux commanded by lower part solenoid voltage regulated by timer with relationships of reflux from 2/1-5/1-10/1-25/1-50/1, pipe in glass adiabatic heating with two encircled by 950W concentric to the column and the pipe in insulating glass with external shirt in stainless steel of protection. Balls in glass from 10-25-50-100-250-500-1000-2000-5000ml, receiver to empty from 50ml, receivers graduated by 10-50-100-250ml, spiral inox for fi lling column Ã5mm, helices in glass for fi lling columns Ã12 and 25mm, electric heater for balls with device for regulation height, screens of protection balls on stainless steel. All the parts in glass are to normalized conic joints. Control console for the control of the automatism. The all assembled on anodized metallic framework. |
|
DEAN AND STARK APPARATUS ASTM D95 IP 74 |
This instrument is used to determine the water in range from to 25% volume in petroleum products, tars, and other bituminous materials by the distillation method. Mantle heater with steel rod and clamp, 500ml flask, condeser and graduated 10ml receiver type A, tapered joints 29/32. |
|
WATER IN CRUDE OIL DISTILLATION APPARATUS ASTM D4006 |
This instrument is used to determine the water in crude oil by distillation. Mantle heater with steel rod and clamp, 1000ml flask, condeser and graduated 5ml receiver type E, tapered joints 24/40. |
|
GASOLINE DILUENT APPARATUS ASTM D322 |
This instrument is used to determinate the amount of dilution in crankcase oils when gasoline has been used as the fuel. Mantle heater with steel rod and clamp, 1000ml flask, condenser and graduated 5ml receiver type E, tapered joint 24/40. |
|
HEATING DISTILLATION UNIT GROUP 0, 1, 2, 3 ASTM D8 |
Completely made in stainless steel, this unit is fitted with a toughned glass window. Heating is controlled by a heating plate which is electronically regulated. The plate is supported by a base whose height is adjustable with an elevation mechanism, controlled by and external handle. For distillation group 0 - 3. |
|
HEATING DISTILLATION UNIT GROUP 0, 1, 2, 3, 4 ASTM |
Completely made in stainless steel, this unit is fitted with a toughned glass window. Heating is controlled by a heating plate which is electronically regulated. The plate is supported by a base whose height is adjustable with an elevation mechanism, controlled by and external handle. For distillation group 0 - 4 |
|
CONDENSING DISTILLATION UNIT ASTM D86 D216 D447 D8 |
This unit is completely made in stainless steel. Condensing tube made of chromium plated brass. Equipped with insulated cover, connections allowing water circulation, drain cock. Both right and left handed condensers are available. This unit can be used as part of GROUP 0-3(990/A)or for GROUP 0-4(990/A/4). |
|
HEATING CONDENSING DISTILLATION UNIT ASTM D86 D216 |
This unit is completely made in stainless steel. Condensing tube made of chromium plated brass. Equipped with insulated cover, connections allowing water circulation, drain cock. PID digital thermoregulator, stirrer pump, stainless steel heater. Range of temperature from ambient to 60°C. Both right and left handed condensers are available. |
|
SEDIMENT IN CRUDE AND FUEL OILS BY EXTRACTION APPARATUS ASTM D473 |
This instrument is used to determine the sediments in crude oils and fuel oils by extraction with toluene. 1000ml Erlenmeyer flask, stainless steel basket supporting an extraction thimble of alundum, cooling metal coil, water cup. |
|
DETERMINATION ASPHALTENES APPARATUS ASTM D6560 |
This instrument is used to determine the heptane insoluble asphaltene content of gas oil, diesel, residual fuel oils, lubricating oils, bitumen,and crude petroleum. Electric heater, 2 tampered joint extractor 24/40 and 34/45, 500ml Erlenmeyer fl ask, cone 24/40, condenser cone 24/40. |
|
TOTAL SEDIMENT TESTER ASTM D4870 IP 375 IP 390 ISO |
Structure in stainless steel with two filtration groups, complete with throttle valve, heating or cooling coil, pipes for steam, water and vacuum, 500ml flask fitted with protection, vacuum manometer. |
|
SULFONATION NUMBER APPARATUS ASTM D1019 |
Consisting of 4 places shaking machine, centrifuge, 4 standard sulfonation flask 100ml graduated to 0.2ml, 4 buckets with rubber pads, 4 ice water jar. |
|
UNSULFONATED RESIDUES APPARATUS ASTM D 483 |
Consisting of 4 places shaking machine with bath 100°C, heated centrifuge, 4 sulfonation flask 50ml, 4 buckets with rubber pads. |
|
HEATED CENTRIFUGE ASTM D91 D96 D893 D1796 D2273 D2 |
Four place model for anti-vibration table, is equipped with a star wheel that has 4 rings swinging up to 90°, max. 2000rpm speed, 482.6mm maximun rotation diameter. Speed is regulated electronically and shown on a digital display. Centrifuging time is set by a digital timer which operates an electric brake (that can be excluded) when the test is finished, electric heating (that can be excluded) controlled by digital thermoregulator and overtemperature alarm. Max. temperature 70°C.. The heater and the brake can be cut out,.Lid fitted with safety device which stops the motor when the lid opens |
|
QUARTZ TUBE SULFUR APPARATUS ASTM D1551 |
This two-place instrument is mounted on a plate painted with epoxidy products and consists of an electric stainless steel furnace with two independent places, two digital thermoregulators with thermocouple, two scrubbers, a trap equipped with two inlet cocks for air or oxygen and two outlet cocks for combustion tubes made in transparent quartz. The tubes are provided with tapered connections at the inlet side and spherical connections at the delivery side. Set of primary and secondary absorbers on support, vacuum collector with two regulating valves, two fl ow-off valves, two LPG Meker lamps, fl ame fi lter mesh for combustion tubes. This item includes 20 porcelain boat. |
|
SULFUR LAMP FOR LIQUIDS PRODUCTS (6 PLACES) ASTM D |
Structure made in plate painted with epoxidy products, 6 lamps, 3 Pyrex regulators, a valve on the vacuum regulator, 3 metallic collectors for the vacuum lines, 6 glass burners, 6 chimneys, gate valves for vacuum and gas, 6 valves on the vacuum lines, 6 valves on the burners line, 1 valve on the chimney line, 2 traps for the chimney line, 1 flowmeter on the vacuum line, 6 25ml Erlenmeyer fl ask, 6 absorber, 6 spray trap. |
|
SULFUR LAMP FOR AROMATICS (6 PLACES) ASTM D1266 |
Structure made in plate painted with epoxidy products, 6 lamps, 3 Pyrex regulators, a valve on the vacuum regulator, 3 metallic collectors for the vacuum lines, 6 glass burners, 6 chimneys, gate valves for vacuum and gas, 6 valves on the vacuum lines, 6 valves on the burners line, 1 valve on the chimney line, 2 traps for the chimney line, 1 flowmeter on the vacuum line, 6 25ml Erlenmeyer fl ask, 6 absorber, 6 spray trap. |
|
SULFUR LAMP FOR LIQUIDS PRODUCTS (2 PLACES) ASTM D |
Structure made in plate painted with epoxidy products, 2 lamps (1490), 3 Pyrex® regulators, a valve on the vacuum regulator, 3 metallic collectors for the vacuum lines, 2 burners, 2 chimneys, gate valves for vacuum and gas, 3 valves on the vacuum lines, 3 valves on the burners line, 1 valve on the chimney line, 2 traps for the chimney line, 1 flowmeter on the vacuum line, 2 flaskes 25ml, 2 tubes U absobiting, 2 drop filters, 2 pescanti 7x430mm, 3 pescanti 7x510mm, 2 regultors Ã40x400mm, 3 regulators Ã40x480mm |
|
SULFUR LAMP FOR AROMATICS (2 PLACES) ASTM D1266 |
Structure made in plate painted with epoxidy products, 2 lamps (1490), 3 Pyrex® regulators, a valve on the vacuum regulator, 3 metallic collectors for the vacuum lines, 2 burners, 2 chimneys, gate valves for vacuum and gas, 3 valves on the vacuum lines, 3 valves on the burners line, 1 valve on the chimney line, 2 traps for the chimney line, 1 flowmeter on the vacuum line, 2 flaskes 25ml, 2 tubes U absobiting, 2 drop filters, 2 pescanti 7x430mm, 3 pescanti 7x510mm, 2 regultors Ã40x400mm, 3 regulators Ã40x480mm |
|
PARTICULATE CONTAMINATION IN AVIATION FUELS ASTM D |
Imbuto metallico sostenuto da una base con supporto per chiusura della membrana a tenuta, 100 filtri a membrana Ã47 mm. In acetato di cellulosa da 0.8 micron. Contenitore di alimentazione in acciaio inox da 5 litri con tappo per spillamento, due bottiglie per ricevimento e sicurezza tipo da 5 litri cilindriche per vuoto collegate tra loro con tubo per vuoto, cavo di collegamento terra installato nelle bottiglie. Struttura metallica per assemblare l'apparecchiatura, tappi in gomma e tubi per collegamento. |
|
MAHLER CYLINDER (OXYGEN CYLINDER) ASTM D240 D4809 |
Capacity 300ml, completely made in stainless steel included the two electrodes, cover with threaded displacing ring, gasket around the cover edge, an automatic inlet valve, a pin exhaust valve. Tested at 210bar. |
|
CALORIMETER VASSEL ASTM D240 D4809 D5865 IP 12 ISO |
Handle for extraction, 2 sectors polycarbonate cover with holes for the passing of stirrer, blade stirrer, motor stirrer 100 rpm 24V with support, double pliers for thermometer, connection for Mahler bomb electrodes. The vessel is fitted with Ignition Device including: low voltage outlet, start pushbutton, 24V socket for motor stirrer, ammeter. |
|
SULFUR IN PETROLEUM PRODUCTS APPARATUS ASTM D129 D |
This apparatus consists of a 300ml oxygen bomb fully made in stainless steel, including its two electrodes, a cover with threaded sliding ring, a gasket around the cover edge, an automatic inlet valve, an exhaust needle valve tested to 210bar, a ignition device housed in a plate box painted with anti-acid epoxidy products, a low voltage outlet for connection with the electrodes of the cylinder, a start button, an ammeter, an O2 reducer gear fi tted with two manometers, a safety valve, a calibration wheel up to 50atm., a pin valve, a capillary copper junction with connection for cylinder charge, a cover support, a quartz dish or by request a crucible made in stainless steel AISI 316, cotton wicking and 10cm platinum ignition wire. |
|
ANILINE POINT ASTM D611 MET.A IP 2 |
Electric heater device, Pyrex jacket 40mm dia.x175mm height, Pyrex test tube 25mm dia.x150mm height, manual stirrer, caps, support. |
|
ANILINE POINT |
Electric heater device, 600ml Pyrexð jar, adjustable support for pumping motor, gauged body pump made in Pyrexð, control box with speed variator for pumping and sample stirring also controlling the intensity of a low voltage lamp. Blocking cover, manual bath stirrer, Pyrexð cell, stainless steel pump, cooling coil. |
|
ANILINE POINT |
Electric heater device, test tube 22mm dia.x150mm height, caps, support. |
|
ANILINE POINT ASTM D611 MET.D |
Electric heater device, test tube Ã22mm, caps, support. |
|
F.I.A. PRECISION |
Flat support made in black material equipped with spring connections that block 4 Precision "True Bore" columns, 4 spherical joint, 4 linear rulers with sliding pointers, 4 socket places fitted with a reducer and manometer for controlling the nitrogen pumped into the columns, 2 stainless steel lamps holder with 365nm UV light source. |
|
F.I.A. STANDARD COLUMNS (4 PLACES) ASTM D1319 IP 1 |
Flat support made in black material equipped with spring connections that block 4 absorbtion Standard columns , 4 analyser, 4 spherical joint, 4 linear rulers with sliding pointers, 4 socket places fitted with a reducer and manometer for controlling the nitrogen pumped into the columns, 2 stainless steel lamps holder with 365nm UV light source. |
|
F.I.A. PRECISION |
Flat support made in black material equipped with spring connections that block 2 Precision "True Bore" columns, 2 spherical joint, 2 linear rulers with sliding pointers, 2 socket places fitted with a reducer and manometer for controlling the nitrogen pumped into the columns, a stainless steel lamp holder with 365nm UV light source. |
|
F.I.A. STANDARD COLUMNS (2 PLACES) ASTM D1319 IP 1 |
Flat support made in black material equipped with spring connections that block 2 absorbtion Standard columns , 2 analyser, 2 spherical joint, 2 linear rulers with sliding pointers, 2 socket places fitted with a reducer and manometer for controlling the nitrogen pumped into the columns, a stainless steel lamp holder with 365nm UV light source. |
|
PONA APPARATUS ASTM D2001 |
Consisting of: distillation column, reflux condenser head, light-ends trap, 12.5ml graduated receiver, clamp for spherical pieces, Dewar jar, thermometer tapered cap, electric heater jacket. |
|
ADSORPTION APPARATUS ASTM D2002 |
Consisting of: adsorption column with upper female tapered linkage and male tapered cap equipped with connection. |
|
EXTRACTION APPARATUS ASTM D 2547 IP 77 IP 182 |
Dual extractor apparatus for the determination of lead, acid and salt content. Structure supports two independent sets of glassware, controlled by two independent elecronic regulator and cooling water supply. |
|
ASH DETERMINATION ASTM D482 D874 D4422 IP 4 IP 163 |
The heat insulation is made in ceramics fibre in order to get a speed heating with a limited energetic consumption. Heating muffle, unthreaded from the back, in an only cast of refractary cordieletic material to provide for thermic joilts. Resistors in KANTHAL screened. Lateral opening door with pressure wedge and with a stop device for electric feeding when it opens, allowing the worker, during the loading and unloading of the muffle, to act with the utmost safety avoiding the contact with the burning part. Natural draught posterior exhaust of the smokes. Control panel is positioned onthe furnace bottom containing a digital visualized thermoregulator and magnetic thermic for protection system. Max. temperature 1100°C. |
|
CONRADSON CARBON RESIDUES APPARATUS ASTM D189 IP |
LPG-heated by Meker lamp fitted with safety valve. Insulating ring block, metal tripod holder with Nichrome triangle, stainless steel chimney. Inner porcelain crucible, middle iron crucible fitted with Skidmore lid and external iron crucible fitted with lid. |
|
RAMSBOTTOM ASTM D524 |
Heating cast-iron block equipped with 5 wells, stainless steel external structure, heating group controlled by a digital thermoregulator, working either on a ̡̉C or a ̡̉F scale, tuning function for the automatic setting of PID parameters, overtemperature warning. Temperature is measured by two K thermocouples. The device is equipped with a control stainless steel crucible, connected to one of the two thermocouples and the reading is provided by a digital thermometer. The hollow space between the walls is fitted with a high efficiency insulator. |
|
WEIGHTED BEAKER ASTM D4057 D270 (obs) IP 51 (obs) |
For light crude oils, light lubricating oils, kerosene, gasoline, transparent gas oils. It is completely made in brass, 946ml capacity, 80mm dia., 350mm overall height, 19mm dia. head, cork with ring. |
|
WEIGHTED BEAKER ASTM D4057 D270 IP 51 |
For heavy crude and fuel oils, heavy lubricating oils and nontrasparent gas oils. It is completely made in brass, 946ml capacity, 80mm dia., 350mm overall height, 38mm dia. head, cork with ring. |
|
WEIGHTED BEAKER ASTM D4057 D270 (obs) IP 51 (obs) |
For light crude oils, light lubricating oils, kerosene, gasoline, transparent gas oils. It is completely made in stainless stgeel, 946ml capacity, 80mm dia., 350mm overall height, 19mm dia. head, cork with ring. |
|
WEIGHTED BEAKER ASTM D4057 D270 IP 51 |
For heavy crude and fuel oils, heavy lubricating oils and nontrasparent gas oils. It is completely made in stainless steel, 946ml capacity, 80mm dia., 350mm overall height, 38mm dia. head, cork with ring. |
|
BACON BOMB ASTM D4057 |
Made in brass, 946ml capacity, 89mm external dia., 385mm overall height, automatic opening on the bottom. |
|
SAMPLING TUBE ASTM D923 D4057 |
Made in brass, 710ml overall capacity, 102cm height, 3.2cm diameter. |
|
SAMPLING TUBE ASTM D923 D4057 |
Made in stainless steel, 710ml overall capacity, 102cm height, 3.2cm diameter. |
|
CAGE FOR SAMPLING BOTTLE |
Completely made in brass, this item protects sampling glass bottles. |
|
SAMPLING BOTTLE MADE IN CLEAR GLASS |
Made in clear glass, 1liter capacity, equipped with cork with ring. |
|
SAMPLING BOTTLE MADE IN DARK GLASS |
Made in dark glass, 1liter capacity, equipped with cork with ring. |
|
PROBE FOR THERMOMETERS ASTM D1086 |
undefined |
|
WINDER 500GR |
Made in steel, support strut and carrying handle, fitted with stopping system. 30m length, 700gr brass counterweight that is millimeter graduated for measuring light products. |
|
WINDER 1200GR |
Made in steel, support strut and carrying handle, fitted with stopping system. 30m length, 700gr brass counterweight that is millimeter graduated for measuring heavy products. |
|
WATER FINDING PASTE, PACK OF 70GR |
undefined |
|
GASOLINE ULLAGE PASTE, PACK OF 50GR. |
undefined |
|
SAMPLING CYLINDER 1000ML ASTM D1265 |
Produced from cold drawn AISI 316L stainless steel tube and seamless construction,, ¼ gas tapered connection and ¼ gas charge, 1000ml capacity, this item is fitted with 2 stainless steel AISI 316 valves and a 20% outage tube. 124bar/1800PSI pressure certificate |
|
SAMPLING CYLINDER 150ML ASTM D1265 GPA 2140 |
Produced from cold drawn AISI 316L stainless steel tube and seamless construction,, ½ gas tapered connection and ¼ gas charge, 150ml capacity, this item is fitted with 2 stainless steel AISI 316 valves and a 20% outage tube. 124bar/1800PSI pressure certificate. |
|
SAMPLING CYLINDER 250ML ASTM D1265 |
Produced from cold drawn AISI 316L stainless steel tube and seamless construction,, ü gas tapered connection and ü gas charge, 250ml capacity, this item is fitted with 2 stainless steel AISI 316 valves and a 20% outage tube. 124bar/1800PSI pressure certificate |
|
SAMPLING CYLINDER 300ML ASTM D1265 |
Produced from cold drawn AISI 316L stainless steel tube and seamless construction,, ½ gas tapered connection and ¼ gas charge, 300ml capacity, this item is fitted with 2 stainless steel AISI 316 valves and a 20% outage tube. 124bar/1800PSI pressure certificate |
|
SAMPLING CYLINDER 400ML ASTM D1265 |
Produced from cold drawn AISI 316L stainless steel tube and seamless construction,, ½ gas tapered connection and ¼ gas charge, 300ml capacity, this item is fitted with 2 stainless steel AISI 316 valves and a 20% outage tube. 124bar/1800PSI pressure certificate |
|
SAMPLING CYLINDER 50ML ASTM D1265 GPA 2140 |
Produced from cold drawn AISI 316L stainless steel tube and seamless construction,, ½ gas tapered connection and ¼ gas charge, 50ml capacity, this item is fitted with 2 stainless steel AISI 316 valves and a 20% outage tube. 124bar/1800PSI pressure certificate. |
|
SAMPLING CYLINDER 500ML ASTM D1265 GPA 2140 |
Produced from cold drawn AISI 316L stainless steel tube and seamless construction, ¼ gas tapered connection and ¼ gas charge, 500ml capacity, this item is fitted with 2 stainless steel AISI 316 valves and a 20% outage tube. 124bar/1800PSI pressure certificate. |
|
SAMPLING CYLINDER 75ML ASTM D1265 GPA 2140 |
Produced from cold drawn AISI 316L stainless steel tube and seamless construction,, ½ gas tapered connection and ¼ gas charge, 75ml capacity, this item is fitted with 2 stainless steel AISI 316 valves and a 20% outage tube. 124bar/1800PSI pressure certificate. |
|
BRASS VALVE |
Brass body fi tted with an AISI 316 stainless steel pin, ¼ cylindrical gas charge and ¼ tapered, straight connection, stuffi ng box, safety stop system on the opening. 100bar pressure certifi cate. It can be mount on our art.10-1610, 1720, 1740, 1750, 1780, 1790. |
|
ALUMINIUM VALVE |
Aluminium body fi tted with an AISI 316 stainless steel pin, ¼ cylindrical gas charge and connection, stuffi ng box, safety stop system on the opening. It is provided with test certificate. It can be mount on our art.10-1570, 10-1580. |
|
STAINLESS STEEL VALVE |
AISI 316 stainless steel body and pin, ¼ cylindrical gas charge and ¼ tapered, straight gas connection, stuffing box, safety stop system on the opening. 124bar/1800PSI pressure certificate. |
|
STAINLESS STEEL VALVE |
AISI 316 stainless steel body and pin, 1/4 cylindrical gas charge and 1/2 tapered, right angle gas connection, stuffing box, safety stop system on the opening. 124bar/1800PSI pressure certificate. |
|
COPPER/SILVER CORROSION BATH ASTMBAGNO CORROSIONE |
Fully made in stainless steel, this bath has a capacity of about 26L and is thermostated by a digital thermoregulator PID that controls a temperature range from ambient to 100ðC, with overtemperature alarm and probe PT100A. The bath includes a pyramid-shaped condensate cover, motor stirrer, a cooling coil and a double bottom. |
|
COPPER CORROSION OF INDUSTRIAL AROMATIC HYDROCARBO |
Thermostatic bath made in stainless steel up to 150°C ±0.1°, 250ml flask, 250mm condenser, 2 pack of 10 pcs copper strip, 1 m copper wire, metal strip vice for holding one copper strip. |
|
LPG CORROSION VESSEL ASTM D1838 IP 411 ISO 6251 |
Stainless steel vessel with two needle valves in stainless steel. Screwtop closure and O-ring sealing gasket. Tested at 70bar |
|
OXIDATION BATH ASTM D943 D2274 D4310 IP 388 DIN 51 |
Five-place stainless steel tank, insulated double wall, stainless steel resistance, stirrer motor, double bottom supporting 5 cells, 5-place flowmeter system fitted with 5 flowmeters with an O2 average flow of 50ml/min (3l/h), with throttle valves that are equipped with a 5-place refrigerating system with pipelines for water inlet and outlet. Temperature is controlled by a digital thermoregulator PID with overtemperature alarm and a probe PT100A. Range °C: ambient to 130° ±0.1° |
|
DRY-HEAT OXIDATION BATH ASTM D943 D2274 D4310 IP 3 |
Five-place stainless steel structure with air well aluminium block, insulated double wall, 4-place flowmeter system fitted with 4 flowmeters with an O2 average flow of 50ml/min (3l/h), with throttle valves that are equipped with a 4-place refrigerating system with pipelines for water inlet and outlet. Temperature is controlled by a digital thermoregulator PID with overtemperature alarm and a probe PT100A. Range °C: ambient to 130° ±0.1° |
|
OXIDATION STABILITY APPARATUS ASTM D2440 IP 280 IP |
Stainless steel structure with a 4 places aluminium block, with digital thermoregulator PID with overtemperature alarm and probe PT100A, collector with six 1l/h of O2 flowmeters fitted with pin valves, back support for 4 absorbing tubes, 4 oxidation tubes. Range temperature ambient to 120°C. |
|
OXIDATION STABILITY APPARATUS 8 PLACES ASTM D2440 |
Stainless steel structure with 8 places aluminium block, with digital thermoregulator PID with overtemperature alarm and probe PT100A, collector with six 1l/h of O2 flowmeters fitted with pin valves, back support for 8 absorbing tubes, 8 oxidation tubes. Complete of glassware. |
|
RBOT & TFOUT BATH ASTM D2112 D2272 D4742 |
Bath made in stainless steel for two vessels with capacity about 60 liters where the oxidation cylinders are turned at 100rpm with a 30° angle according to ASTM specifi cations. Bath temperature rate from ambient to 199°C ±0.1°, controlled by a digital thermoregulator PID with overtemperature alarm and PT100A. |
|
OXIDATION STABILITY BATH ASTM D2440 IP 280 IP 306 |
Oil bath for the immersion of 6 standard test-tubes held by a double bottom. Stainless steel structure, insulated double wall, six independent flowmeters that transfer oxygen at a 1l/h rate. Oil thermostatics is controlled by a digital thermoregulator PID with overtemperature alarm and probe PT100A, heavy duty stirrer motor. This bath is also equipped with an outlet system. Complete of glassware. |
|
OXIDATION LUBRICATING OIL APPARATUS (CIGRE) IP 48 |
Stainless steel structure with a six place aluminium block, with digital thermoregulator PID with overtemperature alarm and probe PT100A, collector with four 15l/h of O2 flowmeters fitted with pin valves, back support for 6 absorbing tubes, 6 oxidation tubes. Range temperature ambient to 200°C. |
|
CORROSIVENESS AND OXIDATION STABILITY BATH ASTM D4 |
Aluminum block with six holes for six pipes of test for temperatures up to 400°C; digital thermoregulator PID with overtemperature alarm, digital display with six termocoppies for the cells with selector for the reading, six fl owmeters for air 10 l/hs with relative valves of regulation, support for assemblage glassworks. |
|
OXIDATION STABILITY BATH (2 PLACES) ASTM D525 D873 |
Completely made in stainless steel, about 30 liters capacity. This item is heated by electric stainless steel heater controlled by a digital thermoregulator PID with overtemperature alarm. The cover works as a condenser with connections for water circulation. Temperature range: ambient to 100°C |
|
OXIDATION STABILITY BATH ASTM D942 IP 142 DIN 5180 |
Structure in stainless steel inox with double wall insulation, cover with two holes for the passage of the bombs, heater in stainless steel, digital thermoregulator with sovratemperature alarm and probe PT100. |
|
CAST IRON CORROSION APPARATUS DIN 51360-1 IP 125 |
100x100x6mm thick cast-iron plate, 250 g 6x1.5-3mm wide steel chips, desicator test chamber, pipette, sieve 600 µm |
|
METALS CORROSION APPARATUS ASTM D1384 |
Thermoregulated electric-plate heater, 1-liter beckers fitted with a rubber stopper, condenser, tube for air diffusion and cold trap, Dewar jar on stainless steel base, fl owmeter system complete with fl owmeter - 100ml/min air fl ow - with pin valves, bars and plier to support the glassware. |
|
RUST PREVENTION TEST BATH 4 PLACES ASTM D665 D3603 |
Oil bath completely made in stainless steel, with double insulated wall, 4 places for the immersion of ASTM containers, armoured stainless steel resistance. Temperature is controlled by a digital thermoregulator PID fitted with overtemperature warning. 4 stainless steel-plate stirrers rotate in their glasses at a constant speed of 1000rpm. Transmission frame and upper weir with bearings block and pulley. |
|
RUST PREVENTION TEST BATH 6 PLACES ASTM D665 D3603 |
Oil bath completely made in stainless steel, with double insulated wall, 6 places for the immersion of ASTM containers, armoured stainless steel resistance. Temperature is controlled by a digital thermoregulator PID fitted with overtemperature warning. 6 stainless steel-plate stirrers rotate in their glasses at a constant speed of 1000rpm. Transmission frame and upper weir with bearings block and pulley. |
|
HUMIDITY CABINET ASTM D1748 |
Thermostatic 18/8 stainless steel tank with double wall. Hinged cover consists of layer of desized cotton cloth secured to an aluminium frame, basket rotating at 1/3 rpm housing 33 sample plates. Air is distributed through 20 porous spheres placed on the tank bottom. Flowmeter with valve throttling at 15l/min air. Level is kept constant by a compensating system. Electric heating with 2 armoured stainless steel heaters, controlled by a digital thermoregulator PID with overtemperature alarm.Two thermometers, bottle for feeding the tank and 33 hooks left and 33 right. |
|
WEATHERING TEST, MERCURY FREEZE METHOD ASTM D1837 |
18/8 stainless steel bath with double wall, copper cooling coil with two ¼" valves. |
|
LABORATORY DEW POINT ASTM D1142 |
60mm dia. pressure gauge with 0-160bar scale,cooling chamber with 1/4" gas valve, stainless steel block with ¼" gas valves, Plexiglass window. Tripod support bench. |
|
PORTABLE DEW POINT ASTM D1142 |
Portable model, 60mm dia. pressure gauge with 0-160bar scale, cooling chamber with 1/4" gas valve, stainless steel block with ¼" gas valves, Plexiglass window. |
|
VAPOUR PRESSURE CYLINDER, 20% LOWER CHAMBER ASTM D |
Made in stainless steel, 70bar hydrostatic presure certificate. A total flow valve without stuffing connections. |
|
VAPOUR PRESSURE CYLINDER, UPPER CHAMBER ASTM D1267 |
80% air chamber with threaded lower neck which allows the connection to the valve, and 1/4" threaded upper head for manometer fitting a 1/4" discharge pin valve. |
|
VAPOUR PRESSURE CYLINDER, 33½ |
Made in stainless steel, 70bar hydrostatic presure certificate. |
|
HYDROMETER ASTM D1657 |
Tubular chamber made in acrylic resins 50X36mm dia. L=440mm, metallic headers coupled with six stainless steel tierods, neoprene gaskets, three ¼ pin cocks (1800). Tested to 15 bar hydraulic pressure. |
|
COBALT BROMIDE METHOD |
Consists of an indicator (10-1780/A) with nickel-plated brass protective sheath with fl ow-off orifice on the header, fi tted with a screw cap, tightness-proof Pyrex capillary tube placed on neoprene gaskets containing the bromide indicator; a copper cooling coil (10-1781) with threaded T-shaped connection ¼" and ¼" needle valve, a manometer (10-1782, 10-1782/15) - ¼" connection, 0-15 bar scale, a 130x230mm dia. Pyrex jar (10-1783). |
|
REID CYLINDER - LIQUID CHAMBER - ONE OPENING ASTM |
Made in chromium-plated brass. In one end of the liquid chamber an opening of approximately 1/2" shall be provided for coupling with the vapor chamber. The inner surface of the coupling end shall be sloped to provide complete drainage when inverted. The other end of the chamber shall be completely closed. |
|
REID CYLINDER - VAPOR CHAMBER ASTM D323 |
Made in chromium-plated brass, with lower coupling, upper 1/2" groove with a 1/4" reducing cap for pressure gauge. |
|
REID CYLINDER - LIQUID CHAMBER - TWO OPENING ASTM |
Made in chromium-plated brass. In one end of the liquid chamber an opening of approximately 1/2" shall be provided for coupling with the vapor chamber, 1/4" pin valve |
|
HYDROGEN SULFIDE IN LIQUEFIED LPG ASTM D2420 |
Stainless steel cylinder 500ml with valve, stainless steel tubing with needle valve, water bath with temperature thermostat, glass cylinder, watch glass, stopper, flow indicator. |
|
SCHILLING EFFUSIOMETER IP 59 |
Glass cylinder, cylinder cover fi tted with three sphere valves for gas charge and flow-off, stainless steel orifi ce plate with a gauged 0.45mm dia., internal tube fi tted with two calibration weight lines |
|
HERSCHEL EMULSIFIER ASTM D1401 DIN 51599 ISO 6614 |
Bath housed in a 200mm dia. Pyrex tank, stainless steel heater controlled by a digital thermoregulator PID with overtemperature alarm and probe PT100A, motor stirrer for bath, centering for 6 emulsion cylinders mounted on a rotating plate so that the cylinders in the bath are under the stirrer motor axle, square bar supporting the stirrer motor with stop system allowing the exact immersion of the blade agitator, stainless steel blade agitator 19x1.5mm L=120.6mm connected to a stainless steel 6.35mm shaft. |
|